Beltermo - Multi

Scope of application
Moisture-resistant plate. It is recommended for external roof insulation, attic floor insulation on a flat surface. It can be used as external insulation under the lining of ventilated facades, insulation of external walls and floors

Natural softwood fibers
MDI polyurethane-based resin (4%)
Paraffin emulsion (1.5%)

Styling recommendations
Lay on a dry, flat and solid surface
Lay the plates tightly together without gaps
It is forbidden to walk on slabs in the gap between the rafters
Slabs are not a load-bearing structure (for example, under snow load)

Request a wholesale price list →
Technical characteristics

Technical characteristics

(according to GOST EN 13171)

  • Edge profile: straight or groove and Ridge
  • Length: 1000-1250mm
  • Width: 575-600mm
  • Thickness: 30 – 180mm
  • Density: approx. 140 kg / m3
  • Nominal value of the thermal conductivity coefficient: 0.039 W / M * K
  • Compressive strength at 10% linear deformation: 80 KPA
  • Tensile strength perpendicular to the product plane: 5 KPA
  • Short-term hygroscopicity: ≤ 1 kg / m2
  • Fire resistance. Euroclass according to STB EN 13501: E
See also
Made on